BP93420IC Industrial Pressure Sensor
Introduction of Industrial pressure sensor:
BP93420-IC is a high temperature industrial pressure sensor
transmitter, using HT19 series silicon pressure isolation
oil-filled core produced by our company as the core measurement
element.The sensor effectively captures the pressure of the
measured medium by means of a dedicated heat dissipation structure
integrated into the transmitter. Reduce the impact of high
temperature on product pressure.This special design makes it well
suited for high temperature demanding environments, making it ideal
for applications involving temperature fluctuations or operating in
higher conditions.It is widely used in industrial processes and
systems where accurate and reliable pressure measurements are
required even in challenging high temperature environments.
Product Features of Industrial pressure sensor:
- 1. Wide measuring range, stainless steel structure, diverse
pressure interface forms
- 2. IP65 protection rating stainless steel structure
- 3. Zero and full-scale adjustable
- 4. High precision, all stainless steel structure
Applications of Industrial pressure sensor:
- 1. Pressure measurement of non-corrosive gases and liquids with
316L stainless steel
- 2. Applied in the marine and aviation industries
- 3. Used in industrial on-site processes such as petroleum,
chemical, metallurgy, power generation, and hydrology
- 4. Utilized in hydraulic and pneumatic control systems
| Performance Parameters of Industrial pressure transmitter sensor |
| Measurement Range | -100kPa…0kPa ~ 10kPa…60MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | 0.1%FS |
| Hysteresis | 0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~150ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex ia IIC T6 Ga |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.4kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
| Order Guide |
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| IB | General Pressure Transmitter | IX | Display Pressure Transmitter |
| IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter |
| IN | Air Conditioning Dedicated Pressure Transmitter | | |
| IC | High-temperature Pressure Transmitter | | |
| IQ/IQT | Large Diaphragm /High-temperature Pressure Transmitter | | |
| Measurement Range | -0.1. . .0~0.01...100MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
1. Q: What are the features of your pressure sensor transmitter?
A: High precision, durable, excellent performance. Customization is
available.
2. Q: Can I customize special specifications?
A: Yes, our engineers can customize products to meet specific
needs. We offer OEM and ODM services.
3. Q:What is your production capacity?
A: Our production facilities can produce up to 30,000 pressure
sensor transmitters per month, so we are well positioned to meet
large orders. However, it is recommended that you contact our sales
team in advance to ensure a smooth production and delivery
schedule.
4. Q: What is the general lead time?
A: 5~8 working days for standard model. Custom products may vary.
5. Q: How is the product priced? Are there any discounts?
A: Competitive prices with discounts for bulk orders or long-term
partners.
6. Q: What is the warranty period of your product? What about
after-sales service?
A: Our warranty period is 24 months after delivery. We will reply
to your questions within 24 hours after sale, and guide you
remotely through PC network at any time.
